Pioneer Covering System

Roll, Base (HR 1000)

This Roll Base (part number HR4505-1) is used in the HR1000 Tuff Tarper Armless Tarping Systems and the Econocover line of tarping systems made by Pioneer.

SPECIAL 34' TARP FOR SA w/4' C

SPECIAL 34' TARP FOR SA w/4' C

36" CYLINDER FOR SA - 5 yr. (W

36" CYLINDER FOR SA - 5 yr. (W

Hook Lift Tarp for SA w/ RFL R

A hook lift tarp system for a single axle (SA) truck with a roll-off or hook lift (RFL) system provides a reliable and efficient way to cover and secure loads on hook lift trucks, especially for waste and refuse transport. These systems are designed...

COVER, 28ft Rect. For Rllmstr

COVER, 28ft Rect. For Rllmstr

HR4759 TARP - VINYL

HR4759 TARP - VINYL

Lower Gantry Only (Plain)

The HR4515 is a lower gantry assembly which is part of the HR4511 complete Gantry Assembly, which is, itself, part of the Pioneer Tuff-Tarper HR1500H Tarping System as well as the HR1500 Econocover System. HR1500H Tuff-Tarper with Hydraulic Gantry The...

90:1 Motor 1.88HP Ass'y

Features: 1.88 HP Ratio 90:1 12 VDC 3 year prorated warranty This Trans Super Torque Motor Assembly is the perfect choice for Mountain's K620TE system, but it will work on any of Mountain's flip tarp, side roll, or Tarp-n-Go systems. It's more...

HR4520 Gantry Cylinder - 36" Stroke

The HR4520 Gantry Cylinder has a 36" lift. This part is used in the Pioneer RP4500SARG Tarp System. When mounting to the HR4511 Gantry Assembly, install the cylinder with the cylinder ports facing the driver side of the chassis. Use H7062...

COVER, for R&P-SA (Cordura)

COVER, for R&P-SA (Cordura)

Cover for RPSA w/ 5' RFL both

Cover for RPSA w/ 5' RFL both

R&P - R.S. Mtg Brkt Assy

The A4006A-1 is the Mounting Bracket Assembly Housing for the right side of your truck. This part is used in the RP4500SA series of Rack 'n Pinion Tarping Systems from Pioneer. Parts Included with A4005A-1: Right Side Mounting Bracket Housing...