Pioneer Covering System

Windscreen Support Angle, 5 7/

This windscreen support angle is for use with the HR1500H series of Tuff Tarper Tarping Systems.

Hydraulic Hose, -4 x 16ft -06F

Hydraulic Hose, -4 x 16ft Cri

Cylinder, Rebuilding Kit for 2

Part number H7200 is a cylinder seal kit for use with Pioneer systems HR4520 and H7039 Cylinders. For use on hydraulic systems (24" and 40" cylinders).

Pioneer H7004B Roller Shaft

The Pioneer H7004B is the roller shaft for the Spring Loaded Roller Assembly that is an integral component of all Pioneer Strong Arm Systems. This item provides the primary core of the roller assembly.

Crossover 102" Bent

The K0422 bent galvanized metal crossover bar is designed for a 102" wide truck bed. Actual total length from end to end is 108".

Bearing Plate, R.S.

Bearing Plate, R.S.

Bearing Plate, L.S.

The Pioneer H7009 bearing plate, specifically the left side (L.S.) version, is a component designed to distribute the load from a hydraulic cylinder, particularly in roll-off container systems. It acts as a protective measure, preventing...

Rocker Switch Assembly - P/N K0176Q

Model: Mountain Tarp K0176Q Mountain replacement rocker switch assembly for use with electric dump truck tarp systems. INCLUDES: Rocker switch (qty: 1) Rocker switch mounting box (qty: 1) 12V solenoid module (qty: 1) 50-amp circuit breaker (qty: 1)...

Crossover 96" Bent

The K0420 bent galvanized metal crossover bar is designed for a 96" wide truck bed. Actual total length from end to end is 102".

Tarp Deployment Rope 37ft.

Tarp Deployment Rope 37ft.

Flow Controls (DRV-08-01 x .5)

Flow Controls (DRV-08-01 x .5)    

K0176M 12V Solenoid (Relay) Module

MODEL: Mountain K0176M This replacement 12V solenoid (relay) module from Mountain is for use with electric dump truck tarp systems, including the K0170S tarp gear motor from Mountain.