Pioneer Covering Systems

Pump Mount, Gantry

Pump Mount, Gantry

Bearing Plate, R.S.

Bearing Plate, R.S.

Bearing Plate, L.S.

The Pioneer H7009 bearing plate, specifically the left side (L.S.) version, is a component designed to distribute the load from a hydraulic cylinder, particularly in roll-off container systems. It acts as a protective measure, preventing...

Rocker Switch Assembly - P/N K0176Q

Model: Mountain Tarp K0176Q Mountain replacement rocker switch assembly for use with electric dump truck tarp systems. INCLUDES: Rocker switch (qty: 1) Rocker switch mounting box (qty: 1) 12V solenoid module (qty: 1) 50-amp circuit breaker (qty: 1)...

Crossover 96" Bent

The K0420 bent galvanized metal crossover bar is designed for a 96" wide truck bed. Actual total length from end to end is 102".

Tarp Deployment Rope 37ft.

Tarp Deployment Rope 37ft.

Flow Controls (DRV-08-01 x .5)

Flow Controls (DRV-08-01 x .5)

K0176M 12V Solenoid (Relay) Module

MODEL: Mountain K0176M This replacement 12V solenoid (relay) module from Mountain is for use with electric dump truck tarp systems, including the K0170S tarp gear motor from Mountain.

3 Piece Telescoping Axle

K0175 Parts Include: R0150: 1/4" x 1" Tek Self-Drilling Screw (Qty: 5)Z1040: 1/4" x 1" Fender Washer SS (Qty: 5)G1633: Aluminum Roll Center Section (Qty: 1)K0375: Outer Axle Drill with Bushing Tele (Qty: 2)K0366: 5/16" Flat Washer (Qty: 4)K0391: 5/16" x...

Rebuild Kit,16in Cylnder -Rack-N-Pinion

Pioneer HR4719A Rebuild Kit, 16in Cylinder for Rack-N-Pinion

Hydraulic Hose, -6 x 144inL x

This hose (part #HR1506) is -6 x 144inL – Crimped on both ends. It is part of the HR1529 Gantry Assembly, which is part of the Econocover Tarping System. Econocover HR1500 Econocover The most economical automatic tarping system offered for...

New Hex Arm Connector w/SS

Hex Cast Arm Connector with set screws. Works on driver or passenger side. For complete assemblies, see Mountain K0269HRA (Driver's side) and K0270HRA (passenger side).