Product Description
System Overview:
The Hydraulic Roller 2000 Power Pull (PP) is a semi-automatic, armless tarping system designed for single-axle and multi-axle hooklift and cable hoist containers, suitable for 20-, 30-, and 40-yard open-top containers. This system is ideal for areas with limited side-to-side clearance, offering safe, smooth, and quiet operation with minimal maintenance.
The hydraulic 3-stage telescopic gantry adjusts vertically from 5.67 feet to 13 feet and provides smooth, quiet, and simple operation. A two-stage heavy-duty cylinder raises the gantry to 13 feet.
Safety features include an audio and visual Up-Gantry alarm in the cab. Gantry cylinders deploy through bearing rings, minimizing play between stages. The gantry’s self-contained support members eliminate the need for additional gusseting.
Fewer moving parts (no chains, sprockets, or pulleys) make maintenance easier. The standard tarp is 8 feet by 31 feet reinforced heavy-duty mesh, with a pig-tail tie-down system.
Operation Instructions:
-
Raise the gantry above the container (over 13 feet).
-
Flip the rope above the load.
-
Walk to the rear of the truck and roll the tarp over the load.
-
Secure the tarp to the provided cleat.
Parts Included:
-
Donut for Aluminum Rear Section
-
4-Foot Hydraulic Hose
-
Gantry Assembly with Cylinder
-
Cylinder Clip
-
Hitch Pin
-
Gantry Alarm Kit
-
Switch Trip Plate
-
2-Foot Pigtail
-
Roller and Windscreen Assembly
-
Tarp Deployment Rope
-
1-1/4 Inch PVC Schedule 40 Tarp Tube, 8.42 Feet Long
-
Chassis Mounting Angle
-
2 Adapters: -6 Joint Industry Council Male x -6 Joint Industry Council Female 90-Degree Elbow
-
Winding Disk to Load Roller
-
All Hydraulic Components Needed to Tap into Truck’s Hydraulic System or Power Take-Off
Hardware & Components:
-
1420325HHCS5: 1/4"-20 x 3-1/4" Hex Head Cap Screw, Grade 5
-
14STOVERLCKN: 1/4"-20 Stoverlock Nut
-
2000PP-HW: Hardware Kit for HR2000 Power Pull
-
516182SHCS: 5/16"-18 x 2-1/4" Socket Head Cap Screw, Stainless Steel
-
51618NLNSS: 5/16"-18 Nylon Lock Nut, Stainless Steel
-
G1616: Donut for Aluminum Rear Section
-
HR1584: Roller Box with Roller for HR2000
-
HR2000PPBOOKS: Hydraulic Roller 2000 Power Pull Instructions
-
HR2020: Gantry Assembly with Cylinder
-
HR2034: Cover — 31 Feet x 8 Feet Rectangular
-
HR2081: Pump Mount for Gantry
-
HR2088: Double-Acting Power Unit, 2 Gallons
-
HR2090: Pendant Mount, 2-Button Control
-
HR4780-1: Winding Disk to Load Roller
-
K0353: 3/8" Flat Washer
-
K0383: 3/8" x 1" Hex Head Bolt
-
R0163: 3/8" Lock Washer
-
RPCRATE: Wooden Crate for Roll and Pull Kits
-
SPHR2000: Serial Plates — HR2000
Key Features & Benefits:
-
Armless System: Ideal for limited side-to-side clearance
-
No Pivot Arms: Reduces maintenance and replacement costs
-
Window Shade-Style Operation: Pull rope to cover load
-
Hydraulic 3-Stage Telescopic Gantry: Vertical adjustment from 5.67 feet to 13 feet
-
Two-Stage Heavy-Duty Cylinder: Raises gantry to 13 feet
-
Audio and Visual Up-Gantry Alarm: Enhances operator safety
-
Bearing-Ring Gantry Deployment: Smooth, quiet operation
-
Self-Contained Gantry Support: No additional gusseting required
-
Minimal Moving Parts: No chains, sprockets, or pulleys, making maintenance easier
Hydraulic Roller
