Product Description
SWAT Cable Hoist Waste Covering System for Roll-Off Trucks
The SWAT® Cable Hoist Waste Covering System is an automatic roll-off truck tarp system from Donovan / Shur-Co. Order by SKU to choose one of 18 catalog-listed cable-hoist configurations with a Mighty Mesh® tarp included. Each part number specifies the container-range family, tarp size and power setup; the selected kit’s details are shown as read-only information.
This listing covers the Cable Hoist table in the Shur-Co Waste & Recycling catalog, not the separate Hook Lift table. It brings the manufacturer part numbers into one product listing so waste haulers, refuse fleets, recyclers and roll-off operators can compare the correct systems before ordering. The truck and container shown in application photographs are not included.
Order Your SWAT Cable Hoist Kit by SKU
Select the full DeBrovys part number in the Order by SKU dropdown above. All 18 listed SKUs are available in that one selection control; container length, Mighty Mesh tarp size and power configuration are not separate customer selections. The selected SKU loads its corresponding price and fixed configuration.
DeBrovys uses the vendor prefix 20- for Donovan / Shur-Co products. For example, the catalog manufacturer number 1811710 is listed here as 20-1811710: the 12–18 ft cable-hoist family, 8 ft x 28 ft Mighty Mesh tarp and Without Wet Kit configuration. A 20–22 ft cable-hoist system with the same tarp size and Without Wet Kit label uses 20-1809616 instead. Similar wording does not make these part numbers interchangeable.
If the needed configuration is uncertain, compare the reference table below and call 502-584-3352 with the truck, hoist and mounting details. Fitment support does not replace the SKU’s displayed purchase price or require a separate quote selection.
Container Coverage and Mighty Mesh Tarp Sizes
The manufacturer’s Cable Hoist ordering table groups systems into 12–18 ft, 18–21 ft and 20–22 ft container ranges. The 12–18 ft straight-arm family requires special attention: the catalog describes 12–16 ft or 14–18 ft coverage depending on pivot location. Do not read the ordering-family label as a promise that every installation covers the full span.
Each range has an 8 ft x 28 ft and a 9 ft 8 in x 28 ft Mighty Mesh tarp configuration. The wider cable-hoist tarp is the catalog version with side flaps. Confirm lateral coverage and the intended container dimensions rather than selecting the wider version simply because it sounds more universal. A 28 ft tarp length is not a 28 ft container rating.
The overlapping ranges reflect different catalog configurations and installation geometry. Have a qualified installer review the pivot location, mounting structure, container clearance and truck layout before choosing a SKU. No unverified vehicle-class rating, universal freight weight or installation-clearance dimension is assigned to all 18 systems here.
Without Wet Kit, With Wet Kit or Self-Contained with Remote
Without Wet Kit
This is the base catalog configuration without the wet kit. Verify whether the truck’s existing hydraulic supply, controls and installation are suitable. The Without Wet Kit label does not mean the tarp system is non-hydraulic, and it does not establish an unrestricted bolt-on installation.
With Wet Kit
The Wet Kit column carries a distinct manufacturer part number for the matching system and tarp size. Confirm actual kit contents, the truck’s hydraulic arrangement and installation scope. Do not infer pump flow, pressure, hose length or included installation labor solely from the Wet Kit label.
Self-Contained with Remote
The catalog expressly identifies remote inclusion with the self-contained configuration. Shur-Co describes this design as isolating the tarp-system hydraulics and allowing operation from positions with better visibility. Confirm electrical supply, pump/enclosure mounting and cable routing for the actual truck. Remote operation does not eliminate the need to check clearances or follow the owner’s manual.
Do not assume a remote is included with either wet-kit column. Order the exact self-contained SKU when that catalog configuration is required, and verify the complete SKU-specific contents before purchase.
SWAT Cable Hoist Technical Specifications
| Specification | Detail |
|---|---|
| System | SWAT® Cable Hoist Waste Covering System |
| Manufacturer | Donovan / Shur-Co |
| Application | Cable-hoist roll-off waste trucks |
| Ordering method | One Order by SKU dropdown; configuration details are read-only |
| Catalog configurations | 18 distinct Cable Hoist part numbers; tarp included |
| Catalog container ranges | 12–18 ft; 18–21 ft; 20–22 ft |
| Straight-arm qualification | 12–16 ft or 14–18 ft coverage, depending on pivot location; the ordering family is labeled 12–18 ft |
| Included tarp | Mighty Mesh®: 8 ft x 28 ft or 9 ft 8 in x 28 ft; wider cable-hoist tarp has side flaps |
| Power configurations | Without Wet Kit; With Wet Kit; Self-Contained with Remote |
| Arm components | 3/16-inch A500B steel arms, gussets and brackets, as described in the catalog |
| Motion system | Precision-cut pivot gears and rack for synchronized arm movement |
| Hydraulic cylinders | Hard-pipe cylinders with nitride-coated rods |
| Tarp service | Quick-release tarp tube with standard spline connection |
| Fitment confirmation | Truck/hoist type, container dimensions, pivot/mount location and hydraulic/electrical installation |
These are manufacturer-described family features. The steel thickness applies to the named arms, gussets and brackets, not every component. The configuration table and installation manuals remain the fitment references for the specific truck.
Compare All 18 Cable Hoist SKUs and Prices
The following HTML table can be read as text; it is not an image of a price list. It follows the manufacturer’s Cable Hoist table with DeBrovys’ 20- vendor prefix. Prices are the existing DeBrovys catalog prices captured for this review on November 22, 2026 UTC; no new markup has been applied. Freight, installation and applicable tax are not quoted by this table. The selected SKU’s product price applies when ordering.
| Container Range | Mighty Mesh Tarp | Power Configuration | DeBrovys SKU | Price (USD) |
|---|---|---|---|---|
| 12'–18' | 8' x 28' | Without Wet Kit | 20-1811710 | $10,670.54 |
| 12'–18' | 8' x 28' | With Wet Kit | 20-1811712 | $11,800.84 |
| 12'–18' | 8' x 28' | Self-Contained with Remote | 20-1811714 | $15,878.81 |
| 12'–18' | 9'8" x 28' | Without Wet Kit | 20-1811711 | $10,590.53 |
| 12'–18' | 9'8" x 28' | With Wet Kit | 20-1811713 | $11,851.64 |
| 12'–18' | 9'8" x 28' | Self-Contained with Remote | 20-1811715 | $15,930.88 |
| 18'–21' | 8' x 28' | Without Wet Kit | 20-1810407 | $10,670.54 |
| 18'–21' | 8' x 28' | With Wet Kit | 20-1810409 | $11,800.84 |
| 18'–21' | 8' x 28' | Self-Contained with Remote | 20-1810411 | $15,878.81 |
| 18'–21' | 9'8" x 28' | Without Wet Kit | 20-1810408 | $10,590.53 |
| 18'–21' | 9'8" x 28' | With Wet Kit | 20-1810410 | $11,851.64 |
| 18'–21' | 9'8" x 28' | Self-Contained with Remote | 20-1810412 | $15,930.88 |
| 20'–22' | 8' x 28' | Without Wet Kit | 20-1809616 | $10,670.54 |
| 20'–22' | 8' x 28' | With Wet Kit | 20-1809618 | $11,800.84 |
| 20'–22' | 8' x 28' | Self-Contained with Remote | 20-1809621 | $15,878.81 |
| 20'–22' | 9'8" x 28' | Without Wet Kit | 20-1809617 | $10,590.53 |
| 20'–22' | 9'8" x 28' | With Wet Kit | 20-1809619 | $11,851.64 |
| 20'–22' | 9'8" x 28' | Self-Contained with Remote | 20-1809622 | $15,930.88 |
Built for Waste Hauling and Serviceable Tarp Replacement
SWAT combines manufacturer-described low-profile arms with precision-cut pivot gears and rack for synchronized arm movement. Its hard-pipe cylinders use nitride-coated rods, and its quick-release tarp tube has a standard spline connection for tarp service. These features are relevant to waste hauling, refuse collection, recycling, construction-debris hauling and demolition roll-off operations.
The catalog describes one-person tarp replacement at the quick-release tube; that does not establish one-person installation of the whole system. Installation work, safe operating procedures and maintenance responsibilities must be checked in the applicable manual. No damage-free operation, quantified downtime reduction or maintenance-free claim is made here.
Fitment Checks Before a Fleet Purchase
Resolve the container-range overlap with mounting geometry
Record the shortest and longest containers used and the planned pivot location. The straight-arm coverage changes with pivot position. The installation manuals require a suitable rigid mounting structure and adequate clearance; container length alone is not a fitment approval.
Separate tarp dimensions from system coverage
Record the needed lateral coverage independently of the container-length family. Match the supplied tarp to its identification information before installation. The width, side-flap configuration and hoist application matter; the same 28 ft tarp length does not make every system equivalent.
Check the power installation, not just the SKU label
For a truck using existing hydraulics, confirm compatibility before ordering a Without Wet Kit SKU. For a Wet Kit SKU, confirm the supplied kit contents and mounting work. For self-contained remote operation, also review pump/enclosure location and electrical routing with the installer. These are purchasing checks, not invented hydraulic or electrical specifications.
Standardize fleet records rather than assuming one SKU fits every truck
For each vehicle, retain its truck/hoist identification, container dimensions, pivot/mount location, power arrangement and selected SKU. A fleet can standardize this record format without buying the same system for vehicles with different mounting geometry or hoist types. Cable-hoist and hook-lift orders need their own catalog references.
This guidance is drawn from the catalog and owner’s manuals. It is not presented as a field-test result, a customer testimonial or a guarantee of compatibility.
SWAT Installation Manuals
Read the manual appropriate to the selected system and confirm applicability with DeBrovys or the installer. The document numbers below are manual identifiers, not sale SKUs.
- SWAT SA 12–18 Owner’s Manual — Document 1811728
- SWAT SA 18–21 Owner’s Manual — Document 1810427
- SWAT Waste Auto-Tarper Manual — Document 1808947
The manufacturer’s Waste & Recycling catalog provides the SWAT family features on page 6 and the Cable Hoist SKU table on page 7. These documents support fitment review; they do not quote installation labor.
Freight, Returns and Ordering Support
Confirm freight arrangements, package weight, delivery access and installation scope for the selected system before purchase. Shipping settings remain configuration-specific; no universal freight class, free-shipping promise or new lead time is introduced by this page.
Read DeBrovys’ Shipping & Returns Policy. It states that all sales are final subject to the limited warranty terms, and authorization is required before returning goods for repair, replacement or credit. Do not assume a standard return window or free return shipping applies to this system.
For SKU and fitment assistance, call 502-584-3352 or use DeBrovys Contact Us. Keep the selected part number available so the team can review the exact configuration.
Related Roll-Off Tarp Systems and Buyer Guidance
Compare system families in Truck Tarp Systems and the SWAT Automatic Tarping System category. Broader applications are organized in Waste Industry Tarps and Gantry Roll-Off Systems.
For an overview of the Donovan product families, read the Guide to Donovan Tarps and Roll-Off Truck Tarp Systems. The guide provides broader purchasing context; the specific SWAT cable-hoist SKU table and owner’s manual determine which configuration to review for this truck.
Frequently Asked Questions
How do I order the correct SWAT Cable Hoist SKU?
Use the Order by SKU dropdown to select a listed part number. The container range, Mighty Mesh tarp size and power setup are fixed for that SKU and are shown as read-only details. Confirm the truck, cable-hoist type, container dimensions and pivot/mount location before ordering; the part number alone is not installation approval.
Which container lengths are listed for SWAT Cable Hoist systems?
The cable-hoist ordering table lists 12–18 ft, 18–21 ft and 20–22 ft ranges. The 12–18 ft straight-arm family has 12–16 ft or 14–18 ft coverage depending on pivot location. Because ranges overlap, DeBrovys or your installer must verify the mounting geometry for the actual truck and containers.
Is a Mighty Mesh tarp included, and which sizes are listed?
Yes. Shur-Co marks the Cable Hoist table Tarp Included. The listed systems have an 8 ft x 28 ft or 9 ft 8 in x 28 ft Mighty Mesh tarp. The wider cable-hoist tarp is the catalog version with side flaps. A 28 ft tarp length does not mean the system is rated for a 28 ft container.
Which SWAT power configuration includes a remote?
The catalog expressly lists a remote with the Self-Contained with Remote configuration. Do not assume remote inclusion for Without Wet Kit or With Wet Kit; confirm the exact SKU’s contents. The self-contained configuration isolates the tarp-system hydraulics, while hydraulic and electrical installation requirements still need fitment review.
Can a cable-hoist SWAT SKU be used for a hook-lift truck?
Do not assume interchangeability. Shur-Co publishes separate Cable Hoist and Hook Lift configuration tables and identifies different replacement-tarp versions. Tell DeBrovys which hoist type the truck uses and have the installer verify the matching system before ordering.
Product Photo Reference
The six official Shur-Co photographs illustrate SWAT family applications, not a verified view of every SKU. The existing DeBrovys base-kit reference is for 20-1811710. Truck and container are not included. Confirm the selected catalog configuration and installation requirements rather than identifying an entire kit from an application photo alone.