Shur-Lok® Replacement Roll Tarps

REPLACEMENT TARPS FOR SHUR-LOK® SIDE ROLL SYSTEM

The Shur-Lok® Side to Side Replacement Roll Tarps can protect whatever you haul. Solutions for everything from grain trailers, grain trucks, grain carts and wagons, potato trailers, and more. 

All Shur-Lok® Replacement Roll Tarps feature reinforced pockets (6" driver side, 3" passenger side), webbing in the hem top and bottom, and double-needle lockstitch sewing for durability. Tarps for 96" wide trailers have a finished size of 123", and for 102" wide trailers, 129".

• Driver-side pockets include 18" webbing straps every 30" for extra reinforcement.
• Available in black, in either 18 oz. or 22 oz. vinyl-coated polyester, these tarps are designed for long-lasting protection and strength.
• Two weights – 18 ounces and 22 ounces. This tarp is wider than the Value Series tarp and built in the same fashion on most new grain trailers. The longer tensioning straps provide slightly better tightening of the tarp, while the extra width makes tarping heaped loads easier. If you are hauling aggregates or something other than small grains, using a Super Duty 22-ounce tarp is recommended.

To ensure proper kit configuration for your trailer, ensure that all selections from the drop-down menus are chosen.

Measuring for a Replacement Tarp

BOX DETAILS & DIMENSIONS See Figure 1 for A3, E1 & E2 measurements.

TRAILER WIDTH: ______________ For tarp widths: a 94”-98” wide box use a 123” wide tarp, and a 99”-102” wide box use 129” wide tarp.

A3 ____________________ UPPER BOX LENGTH – Cap face panel to cap face panel. This will be the vertical surface of the cap.

E1 ____________________ FRONT CAP ROOF PANEL DEPTH (minimum depth must be 10”)

E2 ____________________ BACK CAP ROOF PANEL DEPTH (minimum depth must be 10”)

Determine Tarp Length: ___________ - ___________ - ___________ + 16” = ______________________ Calculated Tarp Length A3 E1 E2 Tarp overlap on caps