SWAT Automatic Waste Tarping System for Roll-Off Trucks

The SWAT Automatic Waste Tarping System for Roll-Off Trucks is a fully automatic, adjustable tarp-system solution for commercial refuse, recycling, demolition, construction, and scrap fleets. Designed around Shur-Co’s synchronized rack-and-pinion platform, this configuration combines telescoping gantry hardware with a Mighty Mesh tarp to help operators cover roll-off containers smoothly, reduce manual handling, and keep daily hauling operations moving. Select the configuration that matches your container width and whether your truck requires the supplied hydraulic valve kit.

DeBrovys supplies the exact four SWAT configurations shown in the product dropdown. Every option is built around a 28-foot Mighty Mesh tarp and telescoping gantry assembly; the selection changes the tarp width and valve-kit inclusion. Confirm the truck’s hydraulic layout, container dimensions, and mounting clearances before ordering. Our team can also discuss custom fabrication or heat-sealed-panel solutions where a standard tarp configuration does not match the operating environment.

SWAT Automatic Roll-Off Tarp System at a Glance

For fleets that need repeatable load coverage without climbing on containers or manually pulling a tarp, SWAT provides a fully automatic front-to-back system. Its adjustable rack-and-pinion design is intended to produce controlled, synchronized arm movement. Shur-Co’s published SWAT features include precision gear-and-rack components, hard-pipe hydraulic cylinders, low-profile pivot arms, powder-coated steel components, and a quick-release tarp tube with standard spline connection. The result is a practical roll-off tarp system for fleets focused on uptime, service access, and a consistent operator routine.

Choose the Correct SWAT Configuration

Use the Choose a Part dropdown to select the exact current SKU. A valve-kit selection is not a minor accessory choice: it determines whether the configuration is supplied with the hydraulic valve kit. Likewise, select the 8-foot or 9-foot-8-inch tarp width only after measuring the container and checking the installation drawing, arm travel, and clearance requirements. The listed options, live prices, and SKU mapping are preserved below for ordering reference.

Important ordering guidance: Prices and product availability shown on this page are tied to the live selected variant and may change. Do not substitute a part number based only on tarp width. Confirm whether the truck needs a valve kit, whether its hydraulic system is compatible, and whether the selected gantry package matches the container fleet before purchase.

Why Fleets Choose an Automatic SWAT Tarp System

Roll-off operations expose tarping equipment to repeated cycles, abrasive material, changing container heights, and active jobsite conditions. An automatic system gives drivers a more consistent coverage process than a loose manual tarp while reducing the number of steps required at the container. The SWAT platform uses front-to-back deployment and an adjustable rack-and-pinion arrangement intended to keep the arms moving together. Its low-profile pivot arms are designed to reduce exposure around wide containers and compactors, while hard-pipe hydraulic cylinders help minimize the risk of hose damage in rugged refuse and demolition work.

Mighty Mesh is used where a fleet needs airflow through the tarp while containing typical hauled material. Mesh selection should reflect the actual load. It is appropriate to review containment requirements, load characteristics, local operating rules, and the condition of the container before deciding whether Mighty Mesh is suitable for a particular hauling application.

Installation and Compatibility Checklist

Before placing an order, work through the checklist below with the truck, container, and hydraulic-system details available. This reduces installation delays and helps ensure that the selected valve-kit configuration is appropriate.

• Measure the container width and confirm whether the 8-foot or 9-foot-8-inch Mighty Mesh tarp option is required.
• Confirm that the operating container length and height are suitable for the selected SWAT telescoping gantry arrangement.
• Determine whether the truck requires the supplied hydraulic valve kit or an alternative hydraulic connection approach.
• Inspect the frame area, mounting surfaces, hydraulic routing, and arm-travel clearance before installation.
• Verify the fleet’s preferred tarp attachment hardware. Shur-Co publishes spline, square-nut, and threaded mounting options for SWAT systems; verify the exact kit contents and required hardware for this SKU before installation.
• Check applicable local load-cover and operating requirements independently; equipment selection does not replace fleet compliance procedures.

Serviceability, Tarp Replacement, and Routine Maintenance

Fleet uptime depends on routine inspection as much as on the original system selection. Before each operating day, check the tarp for abrasion, inspect the arms and rack path for debris, and observe whether both sides deploy and retract evenly. Inspect hydraulic connections and cylinder surfaces according to the truck manufacturer’s and system manufacturer’s maintenance guidance. Do not operate a damaged mechanism or attempt a service procedure without qualified personnel and appropriate lockout practices.

The SWAT platform is published with a quick-release tarp tube and standard spline connection to simplify tarp service. A one-person tarp replacement may be possible only when the equipment configuration, work environment, personnel training, and safety procedures allow it. Use the exact replacement tarp and attachment method specified for the installed system. DeBrovys can help identify a compatible replacement tarp, provide custom fabrication direction, or discuss heat-sealed panels where the application calls for them.

SWAT System Fit: When to Consider Gantry Alternatives

SWAT is designed for common roll-off container applications and adjustable operation. Shur-Co describes SWAT and SWAT SA options for container ranges such as 12–21 feet and 20–22 feet depending on the model, truck class, and container height. The product variants on this page are specific 28-foot Mighty Mesh telescoping-gantry packages; use the dropdown details—not a general model range alone—to determine the correct order.

For mixed fleets, unusually long containers, staged extension needs, or specialized overhead support requirements, compare the package against other gantry roll-off systems. For broader fleet coverage and related components, review our waste industry tarp solutions. Operators seeking related automatic-cover configurations can also compare the DBR Roll-Off Waste Tarp System and consult our Quick-Flip III Waste Tarp System page.

Expert Application Guidance for Refuse, Recycling, and Construction Fleets

In field use, the system choice starts with the daily container profile—not only the truck. A fleet that alternates between demolition boxes, recycling containers, and refuse containers should document width, height, load type, and access conflicts before standardizing a tarp package. Doing this up front makes it easier to select the 8-foot versus 9-foot-8-inch tarp, establish a correct valve-kit approach, and order the right service parts later. It also helps maintenance teams define inspection points and stock the correct replacement components.

For asphalt, rock, abrasive demolition debris, or unusual material temperatures, assess the exact tarp and system configuration with a qualified equipment representative before use. No tarp system eliminates the need for safe loading, securement procedures, operator training, or compliance with applicable laws. DeBrovys recommends documenting configuration details at installation and retaining the selected SKU with the unit’s maintenance record for faster service identification.

Frequently Asked Questions

Which SWAT option includes the hydraulic valve kit?

Part numbers 20-1809618 and 20-1809619 are the two current dropdown options listed with a valve kit. Confirm the truck’s hydraulic requirements before ordering.

How do I choose between the 8-foot and 9-foot-8-inch Mighty Mesh tarp?

Select the width that matches the container and installed-system requirements. Measure the container and verify gantry, arm-travel, and mounting clearance before choosing a part number.

Is this a manual tarp system?

No. SWAT is a fully automatic adjustable tarp-system platform. The selected configuration and truck hydraulic setup determine the installation details and operating controls.

Can I replace the tarp without replacing the whole system?

SWAT is published with a quick-release tarp tube and standard spline connection, which are designed to simplify service. Confirm the exact installed attachment method and replacement-tarp specification before ordering.

Can DeBrovys help with a non-standard container or replacement tarp?

Yes. Contact DeBrovys with the truck model, container measurements, installed part number, and photos of the existing attachment points. We can help evaluate custom fabrication, compatible replacement tarps, and heat-sealed-panel requirements where applicable.

Order the Correct SWAT Waste Tarping System from DeBrovys

Select the required part number from the product dropdown, then verify the valve-kit choice, tarp width, mounting conditions, and freight requirements before checkout. For additional selection guidance, read the DeBrovys guide to Donovan tarps and roll-off truck tarp systems or contact our team for configuration assistance. DeBrovys supports commercial fleets with product guidance, replacement-tarp knowledge, custom fabrication discussion, and practical system-selection support.