Hy-Tower Tarp 8'4" x 28' Black Knitted Mesh

Hy-Tower Replacement Tarp: 8 ft 4 in × 28 ft Black Knitted Mesh

This Hy-Tower replacement tarp is the black knitted mesh cover identified by part number 1801026, previously 2978. Its listed size is 8 ft 4 in wide by 28 ft long, and the manufacturer catalog places it in the 22-foot-container application. DeBrovys lists this exact replacement under SKU 20-2978/1801026. It is a replacement tarp, not a complete Hy-Tower system or a roller assembly.

Use the part number, dimensions and installed attachment configuration together when ordering. The 22-foot-container designation describes the intended application; it does not mean the tarp itself is 22 feet long. The tarp is 28 feet long. Matching only the container length can lead to an incorrect replacement if the existing cover uses different fabric, width or flaps.

Verified Hy-Tower Tarp Specifications

The 70% shade figure is a published material characteristic, not a guaranteed containment rating, a waterproof rating or a load-capacity specification. Fabric weight per square yard, denier, cold-crack rating and fire-retardant certification are not established by the cited part-specific listing. Do not substitute unrelated material specifications when ordering this cover.

1801026 vs. the Separate Hy-Tower Tarp With Flaps

Hy-Tower replacement listings distinguish the standard 1801026 cover from part 1801020, the black knitted mesh cover with flaps. The manufacturer lists 1801026 at 8 ft 4 in × 28 ft and lists the with-flaps version separately at 8 ft × 28 ft. Both appear in the 22-foot-container group, so container length alone does not distinguish them. This page sells 1801026; it does not combine both configurations into one option.

Before ordering, compare the number on the existing tarp, your maintenance record or the equipment parts list. An older reference to 2978 points to 1801026. If your current cover has side flaps, do not assume those features are included in this item. Ask DeBrovys to identify the correct replacement using the existing part number and photographs of the cover edges. Similar names and nominal sizes are not a substitute for the right configuration.

Choosing Black Knitted Mesh for a Roll-Off Application

The published material description identifies knitted black mesh as designed especially for Hy-Tower systems and describes it as rip resistant with 70% shade. Mesh is an open material rather than a continuous solid barrier. Consider it for the intended Hy-Tower roll-off application when the existing equipment specification calls for this cover. Do not treat the mesh as a waterproof rain cover or promise that it retains every type of fine material.

The useful selection question is not simply whether mesh or vinyl is stronger. Start with the approved equipment configuration, the material being hauled and the cover already in service. A different material can have different handling and attachment requirements. If the operation requires moisture protection or has a specific containment requirement, confirm the appropriate cover before replacing the existing tarp with a different fabric.

Browse Waste Industry Tarps for related container and waste-covering products. That category helps separate replacement system tarps from manual throw tarps, compactor panels and other covers. The wider Truck Tarps category is useful when the job belongs to a different truck or trailer application.

Check Fit Before Replacing a Hy-Tower Tarp

Confirm that the installed system uses replacement part 1801026 or its previous number 2978. Then compare the listed 100-inch width, 28-foot tarp length and standard configuration to the old cover and equipment instructions. Inspect how the cover attaches at each end and where it is secured during operation. Do not infer a particular pocket size, spline design, grommet spacing or webbing arrangement from a generic truck-tarp description.

The 22-foot-container application is not a universal-fit guarantee for every roll-off truck, trailer or box. The system configuration and attachment details still matter. The Hy-Tower system page provides a route to the separate equipment product. Buying this replacement tarp does not include that system, a hydraulic power unit or a replacement roller bar.

For a fleet with several containers or system versions, record the replacement part number alongside the vehicle or system identifier. That gives the next buyer a more reliable reference than a general description such as “black mesh roll-off tarp.” Keep photos of the existing cover and its end attachments available for fitment questions, especially if an older repair changed the original configuration.

Inspection and Replacement Planning

Inspect the old tarp before choosing a replacement. Look for tears, worn attachment areas and places where the cover has been rubbing against an obstruction. Replacing the fabric alone will not resolve a damaged attachment point or an operating problem elsewhere in the system. Follow the equipment instructions when inspecting or replacing the cover, and have system damage assessed before returning the equipment to service.

Do not climb onto an unstable load or work around moving tarp hardware to take measurements. Follow the equipment's safe shutdown procedure and use a qualified service provider where the work requires it. This product description identifies the replacement cover; it is not an installation manual and does not establish a new maintenance interval or operating procedure.

For help preparing an order, provide the installed system identification, the old part number, required dimensions and photos of the attachments. Ask about current availability and shipment details before scheduling work that depends on delivery. The product price and checkout shipping calculation apply to the current order; this page does not promise a particular dispatch date or free shipping.

Frequently Asked Questions About Hy-Tower Replacement Tarp 1801026

What size is this Hy-Tower replacement tarp?

The listed tarp size is 8 ft 4 in × 28 ft, equivalent to 100 inches wide by 28 feet long. It is listed for the 22-foot-container application. The container length and the tarp length are different measurements.

Is part 1801026 the same reference as the older 2978 number?

Yes. The replacement listing associates current part number 1801026 with previous part number 2978. DeBrovys keeps both references in SKU 20-2978/1801026 to help identify the correct cover.

Does this product include the with-flaps version?

No. This page is the standard 1801026 black knitted mesh tarp. The with-flaps replacement is separately identified as 1801020. Compare the actual configuration and part number rather than selecting solely by container length.

Is black knitted mesh waterproof?

Do not treat this mesh cover as waterproof. Its published material description identifies knitted black mesh as rip resistant with 70% shade. Confirm a suitable alternative if the application requires a solid moisture barrier.

Can I order a different size or a complete Hy-Tower system here?

This page is one fixed-size replacement tarp, not a configurable size range or a complete system. Select the correct separate product for different equipment. Contact DeBrovys if a part number, dimension or attachment detail needs to be checked before ordering.

Order the listed Hy-Tower replacement tarp when part number 1801026 and its configuration match the equipment. For fitment help, call DeBrovys at 502-584-3352 or contact DeBrovys. Read the roll-off tarp-system guide for broader equipment context. If a standard replacement does not match the job, ask whether custom fabrication is appropriate; any sewn construction or heat-sealed panel option must be confirmed for the selected fabric and system rather than assumed for this knitted mesh item.