Product Description
9 ft × 55 ft Orange Knit Sidewinder Replacement Tarp
This DeBrovys listing is for one orange knitted-polyester replacement tarp listed at 9 ft wide by 55 ft long, SKU 25-1150K. It appears in the Refuse Transfer Trailer Tarps category as a Sidewinder-style cover. The material has an open knit, so it allows airflow through the fabric; it is not a solid waterproof vinyl tarp. Before ordering, confirm the exact installed tarp dimensions and attachment construction on your trailer instead of assuming every product carrying the Sidewinder name has the same width or end treatment.
The current catalog identifies a shipping/product weight of 18 lb. That is not an 18 oz. fabric-weight specification, a UV rating, or a measure of strength. The listing does not establish a laboratory tear value, a pocket depth, fastener spacing, or guaranteed fit for a specific Sidewinder generation. If you need any of those details, compare the existing tarp and obtain a system-specific confirmation before purchase. The photos currently illustrate an orange refuse trailer application and a separate orange mesh texture; neither picture supplies measured assembly specifications.
Verified Listing Details and What Needs Confirmation
The table separates catalog-confirmed attributes from installation details that should not be guessed from a product name or generic photo.
| Attribute | Listed value | Buyer check |
|---|---|---|
| Product and SKU | Orange knitted-polyester replacement tarp; 25-1150K | Quote the SKU when confirming the specific replacement with DeBrovys. |
| Listed dimensions | 9 ft wide × 55 ft long | Check the needed finished width, installed span, and overlap on your own trailer. |
| Catalog weight | 18 lb | Treat as the product weight in the store record, not fabric ounces per square yard. |
| Material and color | Orange open-knit polyester mesh | Confirm that breathable, non-waterproof mesh suits the intended load and operating conditions. |
| System connection | Listed as a Sidewinder-style replacement | Verify the exact system version, header, pocket or attachment, and mounting method before buying. |
This is a single fixed-size product in the current catalog, with no size, fabric, or color dropdown on the listing. The displayed price is the store's live offer for that one SKU and may change; no alternate-width variant is promised on this product page. Its present catalog brand is DeBrovys, and the `25-` vendor prefix is preserved as part of the existing SKU convention.
Why Nine Feet and Nine Feet Six Inches Are Not Interchangeable
The tarp on this page is labeled 9 ft × 55 ft. A different orange poly-mesh Sidewinder option published for some Sidewinder systems is 9 ft 6 in × 55 ft. Six inches of nominal width is material in a cover that must reach its mounting lines and overlap the load properly. The two listings should not be substituted for one another solely because both are orange and 55 ft long; they may also differ in fabric construction or installation details.
Look at the related 9 ft 6 in × 55 ft orange poly-mesh Sidewinder tarp only as a separate comparison, not an automatically compatible upgrade. The 10 ft × 55 ft black grid Sidewinder tarp is another distinct width and material. For a broader size-and-fabric overview, start at the parent Refuse Transfer Trailer Tarps category.
Each product should be matched to the exact existing covering system, finished fabric span, header and side attachment, and any required end pocket. The 9 ft × 55 ft size and SKU 25-1150K come from this DeBrovys catalog record; currently available public manufacturer literature for a different Sidewinder option cannot establish that its hardware, pocket configuration, or published part number is identical to this one. Ask DeBrovys to verify those details when replacing a worn cover.
How Open-Knit Polyester Changes the Material Choice
The orange textile in this listing is described as knitted polyester mesh. An open knit admits air through its openings, which can be useful when a transfer-trailer operation calls for a breathable cover. Those same openings mean the fabric cannot be described as waterproof, dust-tight, or capable of retaining liquids. The orange appearance makes the material visually distinct from black replacement tarps, but no reflective-performance or regulatory visibility certification is claimed.
Be cautious with blanket durability statements. The former description claimed specific ultraviolet, mildew, and tear resistance without a linked test result; the current catalog does not provide an ASTM method, tested rating, warranty, or textile weight for this SKU. Those properties should be evaluated through a verified technical data sheet if they affect procurement. Similarly, generic claims of reinforced edges or double-stitched hems do not establish this tarp's actual edge pattern, which is not visible in the two current gallery photos.
When choosing a replacement, consider the waste stream and local operating requirements as well as tarp handling: sharp or abrasive debris can contact the cover, a damaged frame can abrade new fabric, and incorrect tension can shorten service life. Open mesh is not a substitute for a solid material if the load requires containment against fine particles, weather, or liquids. Read the DeBrovys tarp-selection guide for general sizing and fabric-selection principles, then confirm requirements for this particular trailer.
Sidewinder Replacement Fit: A Five-Step Field Check
- Identify the system: record the trailer and existing Sidewinder-style system model, installation side, and any replacement-part reference visible on the old cover or equipment paperwork. A Sidewinder name on the product page alone is not a fit guarantee.
- Measure installed width: compare the actual span between the intended attachment lines with the existing finished tarp width. Do not order a 9 ft listing for a 9 ft 6 in requirement—or the reverse—without a verified engineering or fabrication review.
- Measure length and travel: document the required deployed span, header-to-rear length, overlap, and clearance as the cover moves. The listed 55 ft tarp length must still suit your trailer geometry.
- Photograph attachments: capture the header, leading and trailing edges, any pocket or spline, and side attachment points. This listing does not document their exact construction, so they must be checked against the actual replacement.
- Review condition and cargo: inspect hardware and fabric wear points; determine whether a breathable mesh cover is suitable for the material hauled and the relevant local operating rules. Do not treat a material name as a compliance certificate.
If the equipment differs from the listed dimensions or edge construction, ask DeBrovys about a custom-fabricated tarp using the measured requirements and photographs. If joined or heat-sealed panels are needed for another material or design, confirm that process is appropriate; this page does not state that the listed knitted mesh replacement uses heat-sealed seams.
Related Waste-Cover Solutions and Ordering Guidance
This product is offered as a replacement tarp, not a complete side-flip system or a kit of motors, hinges, and arms. If you need the system rather than only its fabric cover, browse DeBrovys Waste Industry Tarps or the broader Waste Industry Tarp Solutions guide to find the right equipment family. For this fixed-size item, use SKU 25-1150K when asking about material, mounting, and current availability.
Customers comparing multiple transfer trailers should keep a separate replacement record for each unit: trailer ID, current tarp width and length, material, system version, attachment photos, and preferred ordering SKU. That is more reliable than a fleet-wide assumption that every 55 ft trailer uses one tarp width. If a supplier quotes a different part with a similar orange mesh appearance, verify the physical dimensions and construction before changing an existing fleet specification.
Frequently Asked Questions About This Orange Sidewinder Tarp
What size and SKU are listed for this replacement tarp?
The DeBrovys product record lists one orange knitted-polyester tarp at 9 ft × 55 ft, SKU 25-1150K. Measure your installed cover and confirm the required finished dimensions before ordering.
Is this the same as the 9 ft 6 in × 55 ft orange Sidewinder tarp?
No automatic equivalence should be assumed. This listing says 9 ft wide, while a separate orange poly-mesh Sidewinder listing says 9 ft 6 in. Match the exact part, fabric, width, and mounting details for your system.
Is the orange knitted mesh waterproof?
No. The material's open-knit structure permits airflow. If the load or weather exposure requires a solid cover, discuss a properly specified solid material and compatible system construction instead.
Are pockets, grommets, or edge reinforcements included?
The present catalog does not provide a verified pocket depth, grommet pattern, spline detail, or edge specification for SKU 25-1150K. Compare the old tarp or ask DeBrovys to verify the attachment construction before purchase.
Does this include the complete Sidewinder mechanism?
No. This is a replacement fabric tarp listing. A complete Sidewinder-style system includes separate mechanical components; confirm a system-specific hardware requirement separately.
Check Exact Fit Before You Replace the Tarp
Review the listed 9 ft × 55 ft dimensions, orange open-knit polyester material, and SKU 25-1150K. Then compare the existing cover's mounting and end construction to this listing before checkout. The catalog weight is 18 lb, not a fabric ounce rating. If the necessary width is 9 ft 6 in or the equipment uses an unverified attachment arrangement, choose a separately documented replacement or request a custom-fit review instead of assuming this tarp fits.
