Product Description
Designed for use with the Rack-N-Pinion system by Pioneer, the OEM #H7002 roller assembly is an essential part of the “Strong Arm” tarping system. This spring-loaded roller assembly creates a fluid rolling action and can be mounted to pivot arms on both stationary and adjustable gantry roll rests. Built using high-strength steel, you can be confident this roller assembly will go the distance and support your tarp system with smooth operation day in and day out.
H7002 Parts Include:
-
Hex Head Cap Screw, 1/4-20 x 1 inch, Grade 8 (Quantity: 1)
-
Hex Head Cap Screw, 1/4-20 x 2 inches, Grade 5 (Quantity: 1)
-
Stoverlock Nut, 1/4-20 (Quantity: 2)
-
Roller, Outer Tube, Aluminum, 88 inches (Quantity: 1)
-
Roll, Shaft, Short (Quantity: 1)
-
Spacer with Bearing, for R&P Roller (Quantity: 2)
-
Roll, Spring, 0.192 inch wire (Quantity: 1)
-
Hex Bolt, 5/16 x 3/4 inch, Grade 8 (Quantity: 6)
-
Lock Washer, 5/16 inch (Quantity: 6)
-
Decal, Pre-Load – H7002 Roller (Quantity: 1)
-
Lock Washer, 1/4 inch (Quantity: 2)
Custom Field
WebP Main Image https://cdn11.bigcommerce.com/s-ip9ovm/products/9501/images/16124/68841e3d8353a375240467-Tarps_Parts_ROT1_H7002_Main__56046.1753576560.450.800.jpg?c=2
