18 ounce Black Vinyl - 7'6" x 16'

18 oz. Black Vinyl Dump Truck Tarp — 7'6" x 16' with Pocket & Grommets

The 18 oz. black vinyl dump truck tarp from DeBrovys is a purpose-built cover designed specifically for dump truck applications. Measuring 7'6" x 16', this tarp features a sewn pocket on one end for attachment to the dump truck's tarp roller bar, and brass grommets on three sides (both long sides and the opposite short end) for secure tie-down during transit. This is the standard configuration used by dump truck operators across the construction, aggregate, and excavation industries to comply with load securement regulations and prevent debris from leaving the truck bed.

Manufactured by Shur-Co (SKU: 20-1902257), this tarp is built from 18 oz. PVC-coated polyester — a material weight that provides the durability and resistance to abrasion, UV degradation, and tearing required for daily dump truck use. The black color provides UV protection for covered loads and presents a professional appearance on the job site.

Product Specifications

How This Tarp Fits a Dump Truck

The 7'6" x 16' size is engineered for standard single-axle and tandem-axle dump trucks. The pocket end slides over the dump truck's rear roller bar — the horizontal tube mounted at the back of the cab shield or front of the body — allowing the tarp to be deployed and retracted with a hand crank or electric tarp system. When the tarp is deployed, it rolls forward from the pocket end to cover the entire load.

The grommets on three sides — both 16-foot sides and the free short end — allow the tarp to be secured tightly against the truck body using bungee cords, tarp straps, or chain hooks. This three-sided grommet configuration prevents the tarp from billowing, flapping, or lifting at highway speeds, keeping the load fully covered and compliant with state and federal load securement requirements.

The 7'6" width is sized to cover the full width of a standard dump truck body (typically 7'0" to 7'6" inside width) with a slight overlap on each side for a secure, weather-tight seal. The 16' length covers most standard dump body lengths from the front bulkhead to the tailgate.

Load Securement Compliance

Federal Motor Carrier Safety Administration (FMCSA) regulations under 49 CFR Part 393 require that loads of loose material — including aggregate, sand, gravel, dirt, and demolition debris — be covered to prevent spillage onto roadways. Most state DOTs have adopted equivalent or stricter requirements. This 18 oz. black vinyl dump truck tarp meets the material strength requirements for compliant load covering when properly secured using the grommet tie-down points on all three sides.

The heavy 18 oz. vinyl weight is important for compliance: thinner tarps (6–10 oz.) can tear under the aerodynamic load at highway speeds, creating a load securement violation even if the tarp was initially in place. The 18 oz. material resists tearing and maintains its integrity across thousands of deployment cycles.

Comparison: Pocket + 3-Side Grommet vs. All-Grommet Tarps

Frequently Asked Questions

Order Your Dump Truck Tarp from DeBrovys

DeBrovys has supplied professional-grade tarps and covers to dump truck operators, contractors, and fleet managers since 1885. Browse our full range of dump truck and trailer tarps, including all tarp sizes and styles. For bulk fleet orders or custom sizes, contact our team.