Product Description
White Polyester #8600 1/2" Mesh Tarp for Refuse Transfer Trailers is a commercial replacement and custom-fit cover for refuse hauling and transfer-trailer applications that need dependable debris containment with airflow through the load cover. The open diamond mesh construction helps reduce wind resistance while the reinforced perimeter and brass grommets provide practical attachment points for everyday fleet use.
Built for Refuse and Transfer-Trailer Coverage
This tarp is made from 100% high-tenacity polyester yarn in a 1/2-inch diamond mesh pattern. The white polyester mesh is intended for open-top refuse and transfer-trailer applications where the cover must contain loose material while allowing air to move through the mesh. It is a useful option for replacement-tarp planning, fleet maintenance, and trailer operators who need a made-to-order finished size rather than a one-size-fits-all cover.
The material is designed for commercial handling and repeated use. Its construction supports tear resistance, dimensional stability, and UV exposure resistance when used in the intended refuse and transfer-trailer environment. Always confirm the trailer dimensions, attachment style, pocket requirement, and operating conditions before ordering.
Reinforced Edges and Secure Tie-Down Points
The perimeter uses reinforced 2-inch polypropylene web hems. Brass grommets are spaced every 24 inches to provide consistent tie-down locations around the finished cover. This edge construction is intended to help distribute tension more evenly than an unreinforced mesh edge during installation and routine handling.
Choose the pocket configuration that matches the trailer or tarp-system installation: No Pocket, or 6-inch Pocket, one end. A pocket changes how the cover is mounted and should be selected only after checking the existing tarp tube, bow, bar, or attachment hardware. If the replacement tarp is being ordered for a fleet, compare the old tarp's edge layout and pocket location before submitting the order.
Available Finished Sizes and Dropdown Options
This product is configured as a made-to-order or manufactured-to-spec cover with separate dropdown selections for pocket style and finished size. Available size choices shown on the product page include the following:
| Option | Available selections | Ordering note |
|---|---|---|
| Pocket configuration | No Pocket; 6-inch Pocket, one end | Match the existing trailer or tarp-system attachment layout. |
| Finished size | 12' × 47'; 12' × 48'; 12' × 51'; 12' × 53'; 12' × 55'; 12' × 56'; 12' × 57'; 12' × 60' | Choose only the finished size that matches the trailer opening and required overlap. |
| Color | White | White polyester 8600 mesh. |
| Mesh opening | 1/2-inch diamond mesh | Use the opening size when comparing airflow and containment requirements. |
Important: Finished dimensions are not interchangeable. Measure the existing tarp, trailer body, pocket position, and attachment points before choosing an option. If your required size is not listed, contact DeBrovys for fit confirmation and available custom-fabrication options.
Technical Specifications
| Specification | Product information |
|---|---|
| Product | White Polyester #8600 1/2" Mesh Tarp |
| Material | 8600 polyester mesh made from high-tenacity polyester yarn |
| Mesh pattern | 1/2-inch diamond mesh |
| Color | White |
| Edge reinforcement | 2-inch polypropylene web hems |
| Grommet spacing | Every 24 inches |
| Application | Refuse hauling and transfer trailers |
| Listed product weight | 36.00 lb |
| Manufacturing time shown | Typically 15–20 business days; confirm current timing before purchase |
| SKU | 10-T-8600-XXXXxx |
How to Choose the Correct Replacement Tarp
- Measure the opening: Record the trailer's usable width and length, including the amount of overlap required by the tarp system.
- Inspect the attachment edge: Note whether the existing tarp uses a pocket, a bar, grommets, or another attachment method.
- Confirm pocket placement: Select No Pocket or 6-inch Pocket, one end, based on the current hardware—not on the trailer name alone.
- Confirm the finished size: Select the exact listed size; do not substitute a nearby length without checking fit and tension.
- Review the application: This mesh is intended for refuse and transfer-trailer coverage. Confirm that the airflow and containment characteristics fit the material being hauled.
For a replacement cover, keeping the same finished dimensions and edge configuration as the tarp being replaced is usually the safest starting point. When the trailer, frame, or tarp system has changed, provide the measurements and photos needed for a fit review.
Operational Benefits for Fleets
A correctly fitted 8600 polyester mesh tarp can simplify replacement planning by giving a fleet a defined material, mesh opening, edge-reinforcement, and grommet-spacing specification. The white color and open mesh also make the tarp easy to identify in a replacement inventory. The most important performance factor is not the product name alone; it is the match between the finished cover, the trailer geometry, the attachment hardware, and the type of refuse or transfer load.
For fleet managers, record the selected finished size and pocket option alongside the trailer number. That makes repeat ordering easier and reduces the risk of sending a tarp with the wrong pocket or length to a maintenance bay. For a single replacement, compare the existing tarp before removing it so its edge layout can be documented.
Related DeBrovys Tarp Resources
Use the Truck Tarps category to compare application-specific covers, including flatbed, dump, roll-off, and trailer tarp routes. For waste-hauling equipment and related coverage choices, review Waste Industry Tarp Solutions. If your equipment is a dump body rather than a transfer trailer, compare Dump Truck and Trailer Tarps before selecting a mesh family.
For planning guidance, read The Complete Guide to Truck Tarp Systems and use the information there to compare tarp-system fit, attachment methods, and replacement considerations. These links are intended to help you choose the correct product family before ordering.
Frequently Asked Questions
What is this white 8600 polyester mesh tarp used for?
It is designed for refuse hauling and transfer-trailer applications that need debris containment with airflow through a 1/2-inch diamond mesh cover.
What pocket choices are available?
The product page provides a No Pocket option and a 6-inch Pocket, one end option. Select the configuration that matches the existing trailer or tarp-system hardware.
What finished sizes are available?
Available dropdown sizes include 12' × 47', 12' × 48', 12' × 51', 12' × 53', 12' × 55', 12' × 56', 12' × 57', and 12' × 60'. Availability should be confirmed at the time of order.
How far apart are the grommets?
The listed specification is brass grommets spaced every 24 inches around the reinforced edge.
Can DeBrovys help with another size or fabrication requirement?
Contact DeBrovys with the trailer dimensions, current tarp photos, pocket details, and attachment requirements. Custom fabrication or heat-sealed panel options may be reviewed where applicable to the requested construction.
Order With Confidence
Before ordering, verify the trailer type, finished dimensions, pocket selection, mesh opening, and attachment points. The product is shown with a 15–20 business-day manufacturing lead time and shipping calculated at checkout; current availability and lead time should be confirmed with DeBrovys. If you need help matching a replacement tarp, contact DeBrovys at 502-584-3352 with your measurements and existing tarp details.
Custom Field
Product Reviews
1 Review Hide Reviews Show Reviews
-
Heavy duty and reliable
We use these on our fleet of transfer trailers. The 1/2 inch mesh is perfect for keeping debris contained while letting air flow through. Very durable construction.