Product Description
SMART2 Remote Cradle: Replacement Charging Station for Part 1124305
The SMART2 Remote Cradle, part 1124305, is the individual charging-cradle component identified for the SMART2 remote system. It gives a SMART2 remote a designated place for charging and storage, helping operators keep a critical tarp-system control in a consistent, protected location between jobs. This listing is designed for buyers who have verified that their existing component is the SMART2 Remote Cradle identified by part number 1124305.
For fleet maintenance teams, truck-equipment shops, and owner-operators, a correctly matched cradle is a small but important service part. A lost, damaged, or worn cradle can make routine charging less orderly and leave a remote without a dependable home in the cab, shop, or service vehicle. This product is for the SMART2 component family; always match the remote model and part number before ordering.
Product Specifications
| Specification | Details |
|---|---|
| Product name | SMART2 Remote Cradle |
| Manufacturer part number | 1124305 |
| DeBrovys SKU | 20-1124305 |
| Product type | Individual charging-cradle component |
| System reference | SMART2 remote system |
| Store category | Truck Tarp Systems |
| Listed product weight | 1.50 lb |
| Current listing price | $43.10 USD |
Important ordering note: part 1124305 is cataloged as the SMART2 Remote Cradle. A separate SMART2 catalog listing is identified as a remote-with-cradle-and-charging-cable configuration. Compare the part number, existing remote, and the components needed for the repair before placing an order.
What the SMART2 Charging Cradle Supports
A charging cradle creates a dedicated location for the remote during charging and when the equipment is not in use. Manufacturer SMART2 documentation instructs users to place the remote in the charging cradle, open the lid, and confirm that the charging cable is connected to both the power source and the cradle. That procedure makes the cradle part of a complete charging setup; it does not replace the remote, charging cable, power source, receiver, or tarp-system controls.
For practical fleet service, label the stored remote and keep the matching charging components together. This reduces the chance of mixing parts from different wireless-control generations during a hurried repair. If the remote model, cable, receiver, or system generation cannot be confirmed, pause the order and verify the equipment identification first.
Confirm SMART2 Compatibility Before Ordering
This product is specifically identified as a SMART2 Remote Cradle. It should not be selected by appearance alone. DeBrovys also lists separate products for newer ShurLink PRO remote configurations, including a ShurLink PRO Remote Cradle and a ShurLink PRO Remote with Cradle and Charging Cable. Those are distinct product listings with different part numbers.
Before ordering a replacement cradle, compare the number on the existing part or service documentation with 1124305. Confirm that the remote is a SMART2 model, identify whether the job requires only the cradle or additional charging components, and check the truck or trailer system documentation for the correct service procedure. Do not assume that a cradle for another remote generation is an interchangeable substitute.
Who Uses This Replacement Part?
The SMART2 Remote Cradle serves operations that rely on a remote to control truck tarp or related trailer equipment. Typical buyers include refuse and recycling fleets, aggregate haulers, agricultural operators, municipal service departments, independent truck owners, mobile repair technicians, and equipment-maintenance managers. The part is particularly useful when maintenance programs standardize service spares by manufacturer part number rather than by a generic description.
For a work truck that changes drivers or shifts, a defined charging location helps make remote handoff more predictable. For a shop, documenting the remote family and the matching cradle part number can prevent a seemingly simple charging-part order from turning into an avoidable return. This is the type of detail that supports uptime without overstating what one component can do.
Replacement-Part Selection Checklist
| Check before purchase | Why it matters |
|---|---|
| Match part number 1124305 | Confirms the product is the SMART2 Remote Cradle listed here. |
| Identify the remote generation | SMART2 and newer remote families use separate product listings and part numbers. |
| Review the charging setup | The cradle works within a charging arrangement that also uses the correct cable and power source. |
| Confirm required components | Determine whether the repair needs only a cradle or a separately listed remote-and-charging configuration. |
| Follow equipment documentation | Use the manufacturer instructions for charging, pairing, and system operation. |
Installation, Charging, and Service Guidance
Use the manufacturer instructions for the SMART2 remote and the equipment on which it is installed. Before placing a remote in the cradle, inspect the charging area and cable for obvious damage. Keep the charging setup away from moving equipment, avoid pinching or routing cables where they can be damaged, and use only the power arrangement specified for the system. A cradle is a service component, not a substitute for safe operating practices, a correctly configured receiver, or trained equipment operation.
When troubleshooting a charging concern, identify the issue before replacing parts. Verify the remote model, inspect the cable connection and power source, and follow the applicable system manual. If the remote is not recognized, will not hold a charge, or belongs to a different product generation, seek the correct technical guidance rather than selecting a cradle based only on a similar-looking image.
Related Truck Tarp System Parts and Resources
Browse the broader Truck Tarp Systems category when planning a larger repair or comparing system components. For application context and tarp-system planning, review the DeBrovys roll-off truck tarp systems guide and visit the DeBrovys blog for related equipment articles. These resources help buyers approach a repair as a system-level decision rather than an isolated part-number search.
When a remote, cradle, cable, receiver, or conversion component is involved, collect the equipment model, remote generation, and existing part numbers before requesting service assistance. Accurate identification improves the chance of receiving the correct components on the first order.
Minimum Order Fee Notice
Orders below $130.00 are subject to a $25.00 SHUR-CO minimum order fee. If your order total is $130 or below, you will be contacted with an additional invoice for the fee before your order ships. Consider grouping verified maintenance parts into one order when appropriate for your operation.
Frequently Asked Questions
Is part 1124305 the SMART2 remote itself?
No. This listing is identified as the SMART2 Remote Cradle, part 1124305. Manufacturer catalog materials separately identify a SMART2 remote-with-cradle-and-charging-cable configuration. Compare the part number and required components before ordering.
Is this charging cradle for a SMART2 remote?
Yes. The product is specifically identified as a SMART2 Remote Cradle. Match the existing remote model and part number before purchase, particularly if your equipment has been updated or converted to a different wireless-control family.
Can I use this cradle for a ShurLink PRO remote?
Do not infer cross-compatibility from similar product names or images. DeBrovys lists a separate ShurLink PRO Remote Cradle under a different SKU. Confirm the exact remote family and the manufacturer documentation before selecting a replacement component.
How is a SMART2 remote charged in the cradle?
SMART2 operating documentation instructs users to place the remote in the charging cradle, open the lid, and make sure the charging cable is correctly connected to the power source and the cradle. Follow the applicable manufacturer instructions for the complete charging setup.
What should I check before ordering a replacement cradle?
Verify part number 1124305, confirm that the existing remote is a SMART2 model, identify whether you need only the cradle or additional charging components, and review the equipment documentation. These checks help avoid ordering a component intended for a different remote generation.
